Product Description:
Our SFP Transciver Module is compliant with MSA SFP Specification, and features a duplex LC connector interface, and a temperature range of -5℃ ~+70℃. Our module is hot pluggable, and supports DDMI (Digital Diagnostic Monitoring Interface). This 1310nm SFP transciver module is designed to deliver a high-performance solution to meet your network needs.
Features:
| Attribute | Value |
| Power Supply | Single 3.3V Power Supply And TTL Logic Interface |
| Pluggable | Hot Pluggable |
| Data Rate | Operating Data Rate Up To 622.08Mbps |
| Connector Type | Duplex LC Connector Interface |
| Product Name | SDH STM-4/SONET OC-12 SFP Transceiver |
| Compliant | Compliant With MSA SFP Specification |
| DDMI | YES |
| Distance | 15km |
| Fiber Type | SMF |
| Temperature Range | -5℃ ~+70℃ |
| Wavelength | 1310nm |
Technical Parameters:
Performance Specifications – Optical
( 1310nm FP and PIN,15Km)
| Parameter | Symbol | Min | Typ. | Max | Unit | Note |
| Transmitter |
| Centre Wavelength | λc | 1280 | 1310 | 1340 | nm | |
| Spectral Width*Note4 | ∆λ | | | 4 | nm | FP-LD |
| Average Output Power | POUT | -15 | | -8 | dBm | |
| Extinction Ratio | ER | 9 | | | dB | |
| Average Power of OFF Transmitter | POFF | | | -45 | dBm | |
| Output Optical Eye | Compliant with IEEE 802.3ah-2004 | |
| Receiver |
| Centre Wavelength | λc | 1200 | | 1650 | nm | |
| Sensitivity*Note5 | PIN | | | -22 | dBm | |
| Receiver Overload | Overload | -3 | | | dBm | |
| Optical Return Loss | | 12 | | | dB | |
| LOS Assert | LOSA | -35 | | | dBm | |
| LOS De-Assert | LOSD | | | -23 | dBm | |
| LOS Hysteresis | | 0.5 | | 4 | dB | |
Applications:
Trixon TSS-1215-31DCR is a 1.25G SFP Optical Transceiver with Duplex LC Connector Interface, hot-pluggable and Digital Diagnostic Monitoring Interface (DDMI) function, supporting up to 622.08Mbps data rate and 10km transmission distance. It provides a cost-effective solution for short-distance data center and enterprise networking.
Trixon TSS-1215-31DCR is designed for short-distance data center and enterprise networking applications, such as fiber channel, Gigabit Ethernet, fiber optic data communication and telecommunications. It is excellent for use in high-density applications with its small form factor, low power consumption, and plug-and-play design.
The Trixon TSS-1215-31DCR is hot-pluggable and designed for installation in any standard SFP cage, making it ideal for use in high-density applications. And its DDMI function can monitor real-time operating parameters, including temperature, voltage, laser bias current, and transceiver output power.
Trixon TSS-1215-31DCR is compliant with SFP MSA and IEEE 802.3 standards, providing high performance in a cost-effective package. It is an excellent choice for today's high-speed data center and enterprise networking applications.
Customization:
Data transfer rate: 622Mbps data transfer rate.
Transmission distance: Supports 15km transmission distance.
Light source type: 1310nm FP (Fabry-Perot) laser is used as the light source.
Fiber type: Supports SMF (Single-Mode Fiber) single-mode fiber.
Connector type: Uses standard SFP connector, compatible with the device’s fiber optic interface.
Operating temperature range: The operating temperature range is -5℃ to +70℃.
Based on these customization requirements, the supplier or manufacturer can design and manufacture customized optical module transmitters according to your needs. They will ensure that the product meets your requirements such as data transfer rate, transmission distance, light source type, fiber type, connector type and operating temperature range.
Please note that specific customized solutions may also involve other details, such as product size, power consumption, electrical interface, compatibility, etc. You can further communicate with the optical module supplier or manufacturer to discuss your customization needs in detail and ensure that the final product meets your expectations and application requirements.
Support and Services:
SFP Transceiver Module Technical Support and Service
We offer full technical support and service for SFP Transceiver Modules. This includes troubleshooting and resolving any technical issues and providing support and advice in the installation and use of the product.
Our team of experienced engineers and technicians are available 24/7 to provide assistance and advice. We also offer remote support services for those who cannot attend our offices in person.
If you encounter any technical issues with your SFP Transceiver Module, or have any questions or queries, please don't hesitate to contact us.
Packing and Shipping:
Packaging and Shipping of SFP Transciver Module
- The SFP Transciver Module should be packaged in an electrostatic discharge (ESD) protective bag.
- The packaged SFP Transciver Module should be placed in an appropriate shipping box.
- The shipping box should be labeled with the product name, part number, and version number.
- The shipping box should be sealed with strong packing tape.
- The shipping box should be sent to the customer using a reliable carrier.
Reference Datasheet File code: DS110026
